Below are some of the tools and equipment available to our customers. TTI, counts on state of the art equipment to Bend, Flare, Weld (Manually, Semi-Automatic, or Fully Automatic), Cone and Thread, Swage, ORFS, Hydro Test, form, and prep all of our hydraulic and pneumatic tubing as well as many other raw materials.
Parker Autoclave Machine
Maxpro Cone & Thread Machine
1-1/2" Threading Machine
This Parker Autoclave Machine is designed to cone and thread Medium and High Pressure tubing from 1/4" to 1" OD. For pressures ranging from 0 to 100,000psi.
This cone and thread machine is mounted on an industrial, heavy duty mobile cart. It is capable of coning and threading Medium and High Pressure Tubing from 1/4" to 1" OD. For pressures ranging from 0 to 100,000psi.
Our 1.5” Threading Machine is used for Medium and High pressure tubing applications. TTI is one of a few companies that can cone and thread 1.5” Medium and High Pressure tubing.
Tubing Flare Machine
Power Flare Machines specialized to flare to 37º for stainless steel tube and pipe. Metric sizes range from 6mm to 30mm and for imperial sizes 1/8" to 1-1/4" OD.
ORFS Parflange - 90° Flare Equipment
Pipe and Tube Flare Equipment
This machine designed for cold flaring tubes and pipes from 1/4" (6mm) to 1" (30mm) OD. This flare machine is suitable for 90° flaring (ORFS - O-Ring Face Seal / JIC-J1453) a wide range of materials, including but not limited to: carbon steel, stainless steel, aluminum, galvanized, plated, and many other alloys. All machines use a “rolling-cone” method in order to achieve perfect surface finish to meet several manufacturer specifications including, GS Hydro, Parker, and others. Call us for more details!
This machine is used to flare tubes and pipes from 1" (30mm) to 5" (90mm) OD up to schedule 160 (6mm). 37° flaring of a wide range of materials, carbon steel, stainless steel, aluminum, and other alloys. JIC-37°, GS-37°, GS-90°, GS-Hydro, Parker, and other flare connections.
Call us for more details!
Electrical Tube/Pipe Bender
Parker Hidraulic Tube/Pipe Bender
Parker Manual Crank Bender
Top benders are ideal for producing consistent quality bends in tube, pipe, and other profiles. They are capable of bending any angle to 180°, steel tube capacity 1/2" up to 2" schedule 80.
Patented tooling system with multiple radii available, as well as variable bending speeds for a wide range of materials. Includes a remote foot pedal for hands free operation.
Hydraulic Tube Bender, for 3/8" to 2" OD with wall thicknesses as great as .188" for tube and pipe.
Operated by means of a separate power source producing up to 10,000 psi hydraulic pressure. Making it an excellent unit to move about and use at the point where the tubing installation is taking place. It can also be attached to a table and used with mandrels.
• Will bend aluminum, copper, annealed steel and annealed stainless steel without kinks or wrinkles.
• Small, large, and close bend radius blocks are available to meet any bending requirement.
• The easy crank operation permits continuous production without excessive operator fatigue, and is good for use in multiple shops, in the field, or in factory maintenance departments.
Hard Pipe Electrical Bender
One Shot Pipe Bender
High Pressure Tube Bender
Electric pipe bender for Pipe 6" OD.
Enerpac Hydraulic Pipe Bender 1/4" to 4".
High and Low pressure tube bender of Autoclave Tubing 3/8", 9/16", 3/4" and 1" OD.
MPI Parker Ferrule Set Tool
Swagelok Swaging Tool
Orbital Tube Welding
MPI Parker tool for setting medium pressure ferrules from 1/4" up to 1" OD.
Swagelok Hydraulic Swaging Units pre-swage 1/2" to 2" ferrules onto stainless steel tubing.
Swagelok Orbital Arc Welding Machine, Specialized for the SS Tube welding
Pressure Test Pump
Pump skids are compact systems with most components mounted within the boundaries of the frame. The systems can be built for water or oil service and have a control panel to contain all gauges and valves. A variety of pressure ranges and are available, for testing components, ranging from 500 psi to 60,000 psi. These systems can be supplied with a reservoir or a city water valved inlet. Reservoirs come with a breather cap, liquid level sight gauge and drain connection.
Temperature and Pressure Recorder designed for general temperature and pressure applications. It records monitored temperature and pressure on a 12-inch diameter chart. Calibrated and certified to meet the most complex quality standards.
CUSTOMER SATISFACTION GUARANTEED
SPECIALTIES & SERVICES
All Rights Reserved | 2016 TTi Oil Inc.| Designed by Elias Gutierrez