Below are some of the tools and equipment available to our customers. Here at TTI Rent tools, we count on state of the art equipment to Bend, Flare, Weld (Manually, Semi-Automatic, or Fully Automatic), Cone and Thread, Swage, ORFS, Hydro Test, form, and prep all of our hydraulic and pneumatic tubing as well as many other raw materials.
Parker Autoclave Machine
Maxpro Cone & Thread Machine
1-1/2 Threading Machine
This Parker Autoclave Machine is designed to Cone and Thread Medium and High Pressure Tubing from 1/4" up to 1" OD. Used for pressures ranging from 0 to 100,000psi.
This Maxpro Cone and thread Machine is mounted on an industrial heavy duty mobile cart. It is capable of Coning and Threading Medium and High Pressure Tubing from 1/4" up to 1" OD. Used for pressures from 0 to 100,000psi.
Our 1.5” Threading Machine is used for Medium and High pressure tubing applications. TTI is one of a few companies that can cone and thread 1.5” Medium and High Pressure tubing.
ORFS Parflange - 90° Flare Equipment
Tubing Flare Machine
Pipe and Tube Flare Equipment
Power Flare Machines specialized of 37º flaring for stainless steel tube and pipe. Metric sizes range from 6mm to 30mm and for imperial sizes 1/8" to 1-1/4" tube or pipe.
This machine designed for cold flaring tubes and pipes from 1/4" (6mm) to 1" (30mm) OD. This flare machine is suitable for 90° flaring (ORFS - O-Ring Face Seal / JIC-J1453) a wide range of materials, including but not limited to: carbon steel, stainless steel, aluminum, galvanized, plated, and many other alloys. All machines use a “rolling-cone” method in order to achieve perfect surface finish to meet several manufacturer specifications including, GS Hydro, Parker, and others. Call us for more details!
Flaring tubes and pipes from 1" (30mm) to 5" (90mm) OD up to schedule 160 (6mm). 37° flaring of a wide range of materials, carbon steel, stainless steel, aluminum, and other alloys. JIC-37°, GS-37°, GS-90°, GS-Hydro, Parker, and other flare connections.
Call us for more details!
Electrical Tube/Pipe Bender
Parker Hidraulic Tube/Pipe Bender
Parker Manual Crank Bender
Top benders is ideal for producing consistent quality bends in Tube & Pipe, and other profiles, bends any angle to 180° , steel tube capacity 1/2" up to 1" Sch 120, 1-1/4 up to 2 1/2" Sch 80 and Pipe capacity 1/2 up tp 1" Sch 120 and 2" Sch 80.
Patented tooling system with multiple radio available variable bending speed for a wide range of materialsremote foot pedal for hands free operation.
Hydraulic Tube Bender Model HB632, from 3/8 O.D. to 2" O.D. / 10 mm to 50 mm, with wall thicknesses as great as 188 for Tube and Pipe. Hydrauli-cally opetared bender.
It is operated by means of a separate power source producing 10,000 psi hydraulic pressure, making it an excellent unit to move about and use at the point where the tubing installation is being made. It can also be attached to a table and used with mandrels.
• Will bend aluminum, copper, annealed steel and annealed stainless steel without kinks or wrinkles.
• Small, large and close bend radius blocks are available to meet any bending requirement.
• The easy crank operation permits continuous production without excessive operator fatigue, and it good for use in tube fabrication shops, in the field or in factory maintenance departments.
Hard Pipe Electrical Bender
One Shot Pipe Bender
High Pressure Tube Bender
Electrical hard pipe bender up tp 6" specialized of the stainless steel tube and pipe.
Enerpac STB Hydraulic Pipe Bender Set, 1 1/4" to 4" One Shot, WT up to SCH 160 (HARD PIPE XXS).
High and Low pressure tube bender of Autoclave Engineering 9/16, 3/4 and 1" tubing.
MPI Parker Swaging Tool
Swagelok Swaging Tool
Orbital Tube Welding
Swagelok Hydraulic Swaging Units pre-swage 1/2" to 2" ferrules onto stainless steel tubing.
Swagelok Orbital Arc Welding Machine, Specialized for the Tubing weld.
MPI Parker swaging tool for 1/4 up to 1" tube fitting nuts.
Temperature and Pressure Recorder-Receiver designed for general temperature and pres- sure applications. It records monitored temperature and pressure on a 12-inch diameter chart.
Pump skids are compact systems with most components mounted within the boundaries of the frame. The systems can be built for water or oil service and have a control panel to contain all gauges and valves. A variety of pressure ranges and are available, for testing components, ranging from 500 psi to 60,000 psi. These systems can be supplied with a reservoir or a city water valved inlet. Reservoirs come with a breather cap, liquid level sight gauge and drain connection.
Pressure Test Pump
CUSTOMER SATISFACTION GUARANTEED
SPECIALTIES & SERVICES
All Rights Reserved | 2016 TTi Oil Inc.| Designed by Elias Gutierrez